English
Mai haɗin RF 4.3 / 10 mace madaidaiciya don kebul na feeder 1/2 inch Featured Image
  • Mai haɗin RF 4.3 / 10 mace madaidaiciya don kebul na feeder 1/2 inch

Mai haɗin RF 4.3 / 10 mace madaidaiciya don kebul na feeder 1/2 inch


  • Wurin Asalin:Shanghai, China (Mainland)
  • Sunan Alama:Telsto
  • Lambar Samfura:TEL-4310F.12-RFC
  • Nau'in:4.3-10 Mai Haɗi
  • Aikace-aikace: RF
  • Mitar:DC-3GHz
  • Dielectric Resistance:≥5000MΩ

    • Bayani

    Ƙayyadaddun bayanai

    Tallafin samfur

    4.3-10 masu haɗawa an tsara su don saduwa da haɓaka buƙatun kayan aikin sadarwar wayar hannu misali, don haɗa RRU zuwa eriya.Ƙananan girman da ƙananan nauyin waɗannan masu haɗin suna yin adalci ga ƙananan abubuwan haɗin yanar gizon rediyo ta hannu.Hannun haɗin kai daban-daban guda uku na masu haɗa filogi mai dunƙulewa, kulle-kulle/turawa da sauri da nau'ikan dunƙule hannu suna iya mate tare da duk masu haɗin jack.

    TEL-4310F.12-RFC1

    Aikace-aikace

    Antennas/Base station/Broad siminti/Cable taro/Cellular/Components/Instrumentation/Microwave Radio/Mil-Aerosol PCS/Radar/Radios/Satcom/Surge Kariya WLAN

    FAQ

    1. Menene ingancin ku?
    Duk samfuran da muke samarwa ana gwada su ta hanyar sashin QC ko ma'aunin dubawa na ɓangare na uku ko mafi kyau kafin jigilar kaya.Yawancin kayayyaki kamar su igiyoyin tsalle na coaxial, na'urori masu wucewa, da sauransu ana gwada su 100%.

    2. Za ku iya ba da samfurori don gwadawa kafin yin tsari na yau da kullum?
    Tabbas, ana iya ba da samfuran kyauta.Muna kuma farin cikin tallafawa abokan cinikinmu don haɓaka sabbin kayayyaki tare don taimaka musu don haɓaka kasuwar gida.

    3. Kuna yarda da keɓancewa?
    Ee, muna keɓance samfuran bisa ga buƙatun abokin ciniki.

    4. Yaya tsawon lokacin bayarwa?
    Yawancin lokaci muna adana hannun jari, don haka bayarwa yana da sauri.Don oda mai yawa, zai kasance har zuwa buƙatun.

    5. Menene hanyoyin jigilar kaya?
    Hanyoyin jigilar kayayyaki masu sassauƙa ga gaggawar abokin ciniki, kamar DHL, UPS, Fedex, TNT, ta iska, ta teku duk abin karɓa ne.

    6. Za a iya buga tambarin mu ko sunan kamfani akan samfuran ku ko fakiti?
    Ee, sabis na OEM yana samuwa.

    7. An gyara MOQ?
    MOQ yana da sassauƙa kuma muna karɓar ƙaramin tsari azaman odar gwaji ko gwajin samfurin.

    Masu alaƙa

    Zane Cikakkun Samfura1
    Zane Cikakkun Samfura2
    Zane Cikakkun Samfura3
    Zanewar Bayanin Samfur4
  • Na baya:
  • Na gaba:

    • TEL-4310F.12-RFC

    RF Connector

    Samfura: TEL-4310F.12-RFC

    Bayani

    4.3-10 Mai haɗin mata don 1/2 ″ kebul na RF mai sassauƙa

    Material da Plating
    Tuntuɓar cibiyar Brass / Azurfa Plating
    Insulator PTFE
    Jiki & Mai Gudanarwa Brass / alloy plated tare da tri-alloy
    Gasket Silicon Rubber
    Halayen Lantarki
    Halayen Tasiri 50 ohm ku
    Yawan Mitar DC ~ 3 GHz
    Juriya na Insulation ≥5000MΩ
    Ƙarfin Dielectric ≥2500V rms
    Juriya lamba ta tsakiya ≤1.0 mΩ
    Juriya na waje ≤1.0 mΩ
    Asarar Shigarwa ≤0.1dB@3GHz
    VSWR ≤1.1@-3.0GHz
    Yanayin zafin jiki -40 ~ 85 ℃
    PIM dBc(2×20W) ≤-160 dBC(2×20W)
    Mai hana ruwa ruwa IP67

    Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB

    Tsarin haɗin haɗi: (Fig1)
    A. gaba goro
    B. baya goro
    C. gasket

    Umarnin Shigarwa001

    Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
    1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
    2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.

    Umarnin Shigarwa002

    Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).

    Umarnin Shigarwa003

    Haɗa goro na baya (Fig3).

    Umarnin shigarwa004

    Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
    1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
    2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.

    Umarnin Shigarwa005

    Kamfaninmu yana da fa'idodi da yawa

    1. Mu masu sana'a, abin dogara da sassaucin sabis shine wani babban amfani na kamfaninmu.Ƙungiyar sabis na abokin ciniki ta ƙunshi ƙungiyar ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun kuma waɗanda ke ba da sabis na sauri, aminci da inganci a ƙarƙashin yanayi daban-daban.Har ila yau, muna ba da mahimmanci ga sassauci don saduwa da canje-canjen bukatun abokan ciniki.

    2. Ƙarfin kasuwancinmu wata muhimmiyar fa'ida ce.Ƙungiyarmu tana da ilimin kasuwanci da ƙwarewa mai ɗorewa, na iya ba da shawarar kasuwanci mai mahimmanci ga abokan ciniki, magance matsaloli daban-daban, da kuma taimakawa abokan ciniki suyi nasara a cikin kasuwa mai tasowa.

    3. Ma'aikatanmu sune mafi kyawun kadarorin kamfaninmu.Suna da wadataccen ilimi da fasaha don biyan duk bukatun abokan ciniki.Kullum muna mai da hankali kan horarwa da haɓaka ma'aikata don tabbatar da cewa za su iya ci gaba da haɓakawa

    Ku rubuta sakonku anan ku aiko mana

    Samfura masu alaƙa