RF Coaxial N namiji zuwa N adaftar kusurwar dama don sadarwa
N Namiji zuwa N Adaftan kusurwar Dama na Namiji N Nau'in Mai Haɗin RF na Namiji RF Coaxial Cable Adapter Connector
Telsto RF Connector yana da kewayon mitar aiki na DC-3 GHz, yana ba da kyakkyawan aikin VSWR da Low Passive Inter modulation.Wannan ya sa ya dace da amfani a cikin tashoshi na salon salula, tsarin eriya da aka rarraba (DAS) da ƙananan aikace-aikacen salula.
Coax adaftan shine hanya mafi kyau don canza jinsi ko nau'in haɗin haɗi akan kebul ɗin da aka rigaya ya ƙare.
Telsto RF Coaxial N namiji zuwa N namiji mai daidaita adaftar kusurwar dama tare da impedance 50 Ohm.An ƙera shi don madaidaicin ƙayyadaddun adaftar RF kuma yana da matsakaicin VSWR na 1.15:1.
Ana amfani da matakan ƙarewar kebul na ƙugiya da manne don wannan jerin.
| Yanayin Zazzabi | -55~+155°C (PE Cable -40~+85°C) |
| Impedance | 50Ω |
| Jijjiga | 100m/S2 (10 ~ 500Hz), 10g |
| Yawan Mitar | DC-11GHz |
| Asarar Shigarwa | <= 0.24dB/6GHz |
| Jurewa Voltage | 2500V rms a matakin teku |
| Voltage aiki | 1000Vr.ms a matakin teku |
| Juriya na Insulation | > = 5000 MΩ |
| Ƙarfin riƙewar goro | 450N |
| Dorewa | > = 500 (kewaya) |
| Juriya lamba | Tuntuɓar cibiyar </1mΩ |
| Tuntuɓar Waje =1mΩ | |
| Matsayin Tsayayyen Wutar Lantarki | Madaidaici <= 1.15/6GHz |
| Kusurwar dama </ 1.25/6GHz |
● N nau'in namiji zuwa N adaftar namiji yana da jikin kusurwa daidai.Wannan nau'in madaidaicin nau'in adaftar N coax adaftar RF adaftar kusurwar digiri 90 ce.
● Nau'in: N nau'in namiji zuwa namiji 90 mai haɗin kusurwar dama, M / M Adafta, RF Coax Coaxial Adafta.
● Ya shafi kayan aikin rediyo da kayan aiki don haɗa igiyoyin coaxial na RF.Yana iya musanya tare da samfurin kamar na duniya.
● Launi: Sautin Azurfa, Plated Nickel.
4.3-10 iri don zaɓinku
| Samfura | Bayani | Bangaren No. |
| Adaftar RF | 4.3-10 Mace zuwa Din Adaftar Mata | TEL-4310F.DINF-AT |
| 4.3-10 Mace zuwa Din Namiji Adafta | TEL-4310F.DINM-AT | |
| 4.3-10 Namiji zuwa Din Adaftar Mata | TEL-4310M.DINF-AT | |
| 4.3-10 Namiji zuwa Din Adafta Namiji | TEL-4310M.DINM-AT |
Masu alaƙa
Samfura:TEL-NM.NMA-AT
Bayani
N Namiji zuwa N Namiji Dama RF Adafta
| Material da Plating | |
| Tuntuɓar cibiyar | Brass / Azurfa Plating |
| Insulator | PTFE |
| Jiki & Mai Gudanarwa | Brass / alloy plated tare da tri-alloy |
| Gasket | Silicon Rubber |
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Yawan Mitar | DC ~ 6 GHz |
| Juriya na Insulation | ≥5000MΩ |
| Ƙarfin Dielectric | ≥2500V rms |
| Juriya lamba ta tsakiya | ≤1.0 mΩ |
| Juriya na waje | ≤0.25mΩ |
| Asarar Shigarwa | ≤0.15dB |
| VSWR | ≤1.15 madaidaiciya;≤1.25 kusurwar dama |
| Yanayin zafin jiki | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBC(2×20W) |
| Mai hana ruwa ruwa | IP67 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
