N Namiji mai haɗin kebul na 1/2 ″ Super m RF na USB
N Maza mai haɗin kai madaidaiciya don 1/2 "Super m RF na USB
Ana amfani da masu haɗin RF yawanci tare da igiyoyin coaxial kuma an tsara su don kula da garkuwar da ƙirar coaxial ke bayarwa.Ana amfani da masu haɗin RF na nau'ikan nau'ikan gabaɗaya don ayyukan mara waya.
Ana samun masu haɗin kai tare da impedance na 50ohm da 75ohm.Matsakaicin mitar yana ƙara zuwa 18GHz.Dangane da mai haɗawa da nau'in kebul.Nau'in haɗin kai na nau'in dunƙule yana ba da haɗin gwiwa mai ƙarfi da aminci.Salon mai haɗawa suna samuwa don sassauƙa, masu daidaitawa, nau'ikan igiyoyi masu ƙarfi da ƙugiya.Ana amfani da matakan ƙarewar kebul na ƙugiya da manne don wannan jerin.
Aikace-aikace: Antennas/Base station/Broad siminti/Cable taro/Cellular/Components/Instrumentation/Microwave Radio/Mil-Aero PCS/Radar/Radios/Satcom/Surge Protection WLAN.
| Nau'in Haɗawa | N namiji hadi |
| Impedance | 50ohm ku |
| Abubuwan Haɗi | Brass |
| Insulators | PTFE |
| Tuntuɓi Plating | Nikel plated |
| Tuntuɓi Pin | Brass, Azurfa plating |
| Crimp ferrules | Copper alloy, nickel plating |
| Siffofin | hana yanayi |
| Nau'in hawa | Dutsen USB |
| Haɗin haɗi | Haɗin mai zare |
| Kebul Model | 1/2" rf coaxial superflex feeder na USB |
| Kafaffen Yanayin | dunƙule |
Aikace-aikacen samfur
N masu haɗin haɗin da ke akwai tare da maza da mata, an ƙirƙira su kuma ƙera su don rukunin GSM, CDMA, TD-SCDMA.
Ƙayyadaddun bayanai
N namiji mai haɗin kebul na 1/2" super m coaxial na USB
1. Ma'auni na Haɗi: Daidai da IEC60169-16
2. Interface dunƙule zaren: 5/8-24UNEF-2A3.Material da Plating:
Jiki: tagulla, Ni/Au plated
Insulator: Teflon
Mai gudanarwa na ciki: tagulla, Au plated
4. Yanayin aiki
Yanayin aiki: -40 ℃ + 85 ℃
Danshi na dangi: 90% ~ 95% (40± 2℃)
Matsin yanayi: 70 ~ 106Kpa
Hazo gishiri: Hazo mai ci gaba na tsawon awanni 48 (5% NaCl)
5. Halayen lantarki
Ƙunƙarar ƙima 50Ω
Kewayon mitar: DC-3G
Juriya na lamba(mΩ): Mai gudanarwa na waje ≤0.25, madugun ciki ≤1
Juriya na Insulation (MΩ)≥5000
Ƙarfin wutar lantarki AC (V/min) 2500
VSWR (0-3GHz) ≤1.10
FAQ
Menene ingancin ku?
Duk samfuran da muke samarwa ana gwada su ta hanyar sashin QC ko ma'aunin dubawa na ɓangare na uku ko mafi kyau kafin jigilar kaya.Yawancin kayayyaki kamar su igiyoyin tsalle na coaxial, na'urori masu wucewa, da sauransu ana gwada su 100%.
Za ku iya ba da samfurori don gwadawa kafin yin oda na yau da kullun?
Tabbas, ana iya ba da samfuran kyauta.Muna kuma farin cikin tallafawa abokan cinikinmu don haɓaka sabbin kayayyaki tare don taimaka musu don haɓaka kasuwar gida.
Kuna yarda da keɓancewa?
Ee, muna keɓance samfuran bisa ga buƙatun abokin ciniki.
Yaya tsawon lokacin bayarwa?
Yawancin lokaci muna adana hannun jari, don haka bayarwa yana da sauri.Don oda mai yawa, zai kasance har zuwa buƙatun.
Menene hanyoyin jigilar kaya?
Hanyoyin jigilar kayayyaki masu sassauƙa ga gaggawar abokin ciniki, kamar DHL, UPS, Fedex, TNT, ta iska, ta teku duk abin karɓa ne.
Za a iya buga tambarin mu ko sunan kamfani akan samfuran ku ko fakitin?
Ee, sabis na OEM yana samuwa.
An gyara MOQ?
MOQ yana da sassauƙa kuma muna karɓar ƙaramin tsari azaman odar gwaji ko gwajin samfurin.
Masu alaƙa
Samfura:Saukewa: TEL-NM.12S-RFC
Bayani
N Namiji mai haɗin kebul na 1/2 ″ Super sassaucin ra'ayi na RF
| Material da Plating | |
| Tuntuɓar cibiyar | Brass / Azurfa Plating |
| Insulator | PTFE |
| Jiki & Mai Gudanarwa | Brass / alloy plated tare da tri-alloy |
| Gasket | Silicon Rubber |
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Yawan Mitar | DC ~ 3 GHz |
| Juriya na Insulation | ≥5000MΩ |
| Ƙarfin Dielectric | ≥2500V rms |
| Juriya lamba ta tsakiya | ≤1.0 mΩ |
| Juriya na waje | ≤1.0 mΩ |
| Asarar Shigarwa | ≤0.12dB@3GHz |
| VSWR | ≤1.08@-3.0GHz |
| Yanayin zafin jiki | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBC(2×20W) |
| Mai hana ruwa ruwa | IP67 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
