Mafi ƙasƙanci farashin 7/16 Madaidaicin Nau'in Maɗaukakin Nau'in Nau'in Haɗin Nau'in Nau'in 1/2 ″ M RF Cable
● RF coaxial na USB taro (7/16 DIN / N / Mini DIN / 4.3-10 / OEM / ODM).
● Muna mai da hankali kan taron coaxial.
● Majalisun mu na USB na RF na al'ada an gina su kuma ana jigilar su a duk duniya.
● Ana iya samar da majalisin kebul na RF tare da nau'ikan masu haɗawa daban-daban da tsayin al'ada dangane da buƙatunku da aikace-aikacenku.
● 1/2 mai haɗin kebul na feeder;4.3-10 mai tsalle mai haɗawa;4.3-10 mace mai haɗin rf tare da flange;4.3-10 lmr 400 mai haɗawa;7 16 din mai haɗin kebul;mai haɗa ganga;haɗin kebul na coaxial;connector 4.3-10;mini din 4.3-10;mx connector;din 7 16 mata connector.
Cikakken Bayani
| Wurin Asalin | Shanghai, China (Mainland) | Sunan Alama | Telsto |
| Lambar Samfura | DINM-12 | Nau'in | 7/16 DIN |
| Aikace-aikace | RF | Jinsi | Namiji |
| Sunan samfur | DINM-12 | Launi | Argent/Golden |
| Kayan abu | Brass | Takaddun shaida | ISO9001/CE/ROHS |
| Nau'in haɗi | 7/16 DIN | Plating | Nickel/Golden palting |
| MOQ | 1 yanki | ODM/DEM | An bayar |
| Juriya na Insulation | ≥ 10000 MΩ | Yanayin Zazzabi | -40°C zuwa +85°C |
FAQ
Menene kamfanin ku MOQ?
MOQ yana da sassauƙa.
Menene lokacin bayarwa?
Wannan don Allah a tambayi hajanmu da farko, samfuran za su iya aikawa da zarar sun karɓi ajiyar ku.Idan amfani da alamun abokin ciniki, za mu ɗauki 3-5days don shirya kayan aiki da samar da taro.
Shin kamfanin ku na iya karɓar keɓancewa?
Barka da OEM & ODM.
Ta yaya kuke warware sabis bayan siyarwa?
Wannan don Allah a neme mu don tallafin fasaha idan kuna da ma'aikata sun san yadda ake gyarawa.Idan ba ku da injiniyoyi, don Allah a mayar da kayan, za mu iya gyara muku kayan.
Za a iya aiko mana da samfur don haɓakawa?
Ana iya ba da samfurori.
Masu alaƙa
Samfura:TEL-DINM.12-RFC
Bayani
DIN Male connector don 1/2 ″ m kebul
| Material da Plating | |
| Tuntuɓar cibiyar | Brass / Azurfa Plating |
| Insulator | PTFE |
| Jiki & Mai Gudanarwa | Brass / alloy plated tare da tri-alloy |
| Gasket | Silicon Rubber |
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Yawan Mitar | DC ~ 3 GHz |
| Juriya na Insulation | ≥5000MΩ |
| Ƙarfin Dielectric | 4000 V |
| Juriya lamba ta tsakiya | ≤0.4mΩ |
| Juriya na waje | ≤1.0 mΩ |
| Asarar Shigarwa | ≤0.08dB@3GHz |
| VSWR | ≤1.08@-3.0GHz |
| Yanayin zafin jiki | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBC(2×20W) |
| Mai hana ruwa ruwa | IP67 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
