7/16 DIN Mace zuwa N Namiji RF Coaxial Adafta Mai Haɗi
Telsto RF Connector yana da kewayon mitar aiki na DC-3 GHz, yana ba da kyakkyawan aikin VSWR da Low Passive Inter modulation.Wannan ya sa ya dace da amfani a cikin tashoshi na salon salula, tsarin eriya da aka rarraba (DAS) da ƙananan aikace-aikacen salula.
Coax adaftan shine hanya mafi kyau don canza jinsi ko nau'in haɗin haɗi akan kebul ɗin da aka rigaya ya ƙare.
Wannan adaftar coaxial mai nickel-plated yana da haɗin haɗin namiji N da ke gaba da haɗin mace na 7/16 DIN.Wannan madaidaiciyar 7/16 DIN mai haɗa adaftar adaftar adaftar RF ce ta cikin layi.
Adaftar mu 7/16 DIN zuwa N shine ƙirar adaftar coaxial tare da impedance 50 Ohm.Wannan adaftar 50 Ohm 7/16 DIN an kera shi don daidaitattun adaftan adaftar RF kuma yana da matsakaicin VSWR na 1.15: 1.
● Duk kayan sun dace da RoHS.
● Farashin gasa.
● sabis na OEM da aka bayar.
● Muna iya samar da nau'ikan haɗin kai daban-daban bisa ga buƙatun abokan ciniki.
4.3-10 iri don zaɓinku
| Samfura | Bayani | Bangaren No. |
| Adaftar RF | 4.3-10 Mace zuwa Din Adaftar Mata | TEL-4310F.DINF-AT |
| 4.3-10 Mace zuwa Din Namiji Adafta | TEL-4310F.DINM-AT | |
| 4.3-10 Namiji zuwa Din Adaftar Mata | TEL-4310M.DINF-AT | |
| 4.3-10 Namiji zuwa Din Adafta Namiji | TEL-4310M.DINM-AT |
Ayyukanmu
1. Amsa tambayar ku a cikin awanni 24 na aiki.
2. Ƙararren ƙira yana samuwa.OEM & ODM maraba.
3. Za a iya ba da mafita na musamman da na musamman ga abokin ciniki ta hanyar horar da kwararrun injiniyoyi da ma'aikata.
4. Lokacin isarwa da sauri don oda mai kyau.
5. Kwarewar yin kasuwanci tare da manyan kamfanoni da aka jera.
6. Ana iya ba da samfurori kyauta.
7. 100% Tabbacin Ciniki na biyan kuɗi & inganci.
Masu alaƙa
Samfura:TEL-NM.DINF-AT
Bayani
N Namiji zuwa DIN 7/16 Adaftar Mata
| Material da Plating | |
| Tuntuɓar cibiyar | Brass / Azurfa Plating |
| Insulator | PTFE |
| Jiki & Mai Gudanarwa | Brass / alloy plated tare da tri-alloy |
| Gasket | Silicon Rubber |
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Yawan Mitar | DC ~ 3 GHz |
| Juriya na Insulation | ≥5000MΩ |
| Ƙarfin Dielectric | ≥2500V rms |
| Juriya lamba ta tsakiya | ≤1.0 mΩ |
| Juriya na waje | ≤0.25mΩ |
| Asarar Shigarwa | ≤0.1dB@3GHz |
| VSWR | ≤1.10@-3.0GHz |
| Yanayin zafin jiki | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBC(2×20W) |
| Mai hana ruwa ruwa | IP67 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
