Tri-band Combiner (Cikin Gida)
Siffofin
● Babban Jagoranci / Warewa
● Ƙimar wutar lantarki 200W ta hanyar shigarwa, Babban Amincewa
● Ƙananan Asarar Shigarwa, Ƙananan VSWR, Ƙananan PIM (IM3)
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Matsakaicin Rage / Asarar Sakawa | 800-960 / ≤0.6 |
| Matsakaicin Rage / Asarar Sakawa | 1710-1880 / ≤0.6 |
| Matsakaicin Rage / Asarar Sakawa | 1920-2170 / ≤0.6 |
| Matsakaicin Rage / Asarar Sakawa | 2500-2700 / ≤0.6 |
| Kaɗaici | ≥80 |
| VSWR | ≤1.25 |
| Ƙarfi | 250w |
| IMD3, dBc@+43dBmX2 | ≤-150dBc |
| Yawan Connectors | 4 |
| Nau'in Haɗa | DIN Mace |
| Yanayin Aiki | -20 zuwa +55 ℃ |
| Aikace-aikace | IP65 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
