Ƙananan PIM 7/16 DIN Namiji zuwa 4.3-10 Adafta Namiji
Adaftar da Telsto Development Co., Limited ke ƙera suna cikin kewayon jeri daban-daban kamar a cikin jeri ko tsakanin jeri, ƙirar madaidaiciya ko kusurwa da wasu tare da fasalin dutsen panel.
An rarraba su bisa ga aikace-aikacen da aka yi niyya na yau da kullun waɗanda kowannensu ke buƙatar takamaiman kaddarorin sa.Akwai manyan ƙungiyoyi huɗu waɗanda aka gano su ta hanyar lambar launi a cikin wannan kasidar: daidaitattun, daidaito, ƙarancin tsaka-tsaki (PIM) da masu adaftar sauri-mate.
Telsto RF Adapter yana da kewayon mitar aiki na DC-3 GHz, yana ba da kyakkyawan aiki na VSWR da Ƙananan Motsawa Tsakanin Motsa jiki {Low PIM3 ≤-155dBc(2×20W)} .Wannan ya sa ya dace da amfani a cikin tashoshi na salon salula, tsarin eriya da aka rarraba (DAS) da ƙananan aikace-aikacen salula.
| Samfura | Bayani | Bangaren No. |
| Adaftar RF | 4.3-10 Mace zuwa Din Adaftar Mata | TEL-4310F.DINF-AT |
| 4.3-10 Mace zuwa Din Namiji Adafta | TEL-4310F.DINM-AT | |
| 4.3-10 Namiji zuwa N Adafta | TEL-4310F.NM-AT | |
| 4.3-10 Namiji zuwa Din Adaftar Mata | TEL-4310M.DINF-AT | |
| 4.3-10 Namiji zuwa Din Adafta Namiji | TEL-4310M.DINM-AT | |
| 4.3-10 Namiji zuwa N Adaftar Mata | TEL-4310M.NF-AT | |
| Din Mace zuwa Din Namiji Adaftan kusurwa Dama | TEL-DINF.DINMA-AT | |
| N Mace zuwa Din Namiji Adafta | TEL-NF.DINM-AT | |
| N Mace zuwa N Mace Adafta | TEL-NF.NF-AT | |
| N Namiji zuwa Din Adaftar Mata | TEL-NM.DINF-AT | |
| N Namiji zuwa Din Namiji Adafta | TEL-NM.DINM-AT | |
| N Namiji zuwa N Mace Adafta | TEL-NM.NF-AT | |
| N Namiji zuwa N Adaftan kusurwar Dama | TEL-NM.NMA.AT | |
| N Namiji zuwa N Namiji Adafta | TEL-NM.NM-AT | |
| 4.3-10 Mace zuwa 4.3-10 Namiji Adaftan kusurwar Dama | TEL-4310F.4310MA-AT | |
| DIN Mace zuwa Din Namiji Dama kusurwa RF Adafta | TEL-DINF.DINMA-AT | |
| N Mace Dama kusurwa zuwa N Adaftar RF na mace | TEL-NFA.NF-AT | |
| N Namiji zuwa 4.3-10 Adaftar Mata | Saukewa: TEL-NM.4310F-AT | |
| N Namiji zuwa N Mace Adaftar kusurwar Dama | TEL-NM.NFA-AT |
Masu alaƙa
Samfura:TEL-4310M.DINM-AT
Bayani
4.3-10 Namiji zuwa Din Adafta Namiji
| Material da Plating | |
| Tuntuɓar cibiyar | Brass / Azurfa Plating |
| Insulator | PTFE |
| Jiki & Mai Gudanarwa | Brass / alloy plated tare da tri-alloy |
| Gasket | Silicon Rubber |
| Halayen Lantarki | |
| Halayen Tasiri | 50 ohm ku |
| Yawan Mitar | DC ~ 3 GHz |
| Juriya na Insulation | ≥5000MΩ |
| Ƙarfin Dielectric | ≥2500V rms |
| Juriya lamba ta tsakiya | ≤3.0 mΩ |
| Juriya na waje | ≤2.0mΩ |
| Asarar Shigarwa | ≤0.3dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Yanayin zafin jiki | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBC(2×20W) |
| Mai hana ruwa ruwa | IP67 |
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
