Hansen feeder na USB 78 ƙananan hasara
Lambar Samfura: Cable Feeder RF
Halayen Gina:
Babban rufin kumfa ta jiki, tef ɗin jan ƙarfe da aka kafa, welded da corrugated don kera madubin waje
Mai Gudanar da Ciki: Bututun Tagulla / Copper Coating Aluminum / Helix Copper Tube
Dielectric: Polyethylene Kumfa na Jiki (PE)
Mai Gudanar da Waje: Bututun Tagulla / Ƙarƙashin Ƙarƙashin Tagulla / Helix Copper Tube
Jaket: Baƙar fata PE ko Ƙarƙashin Hayaki Halogen-kyau mara Wuta
Amfani:
Low attenuation, low igiyar igiyar ruwa, babban garkuwa, damp-hujja gas free tabbatarwa, m, high anti tensile ƙarfi.
Nisan Aikace-aikace:
Watsa shirye-shirye da talabijin, sadarwa ta microwave, amfani da sojoji, sararin samaniya, jirgin ruwa ko wani yanayi inda ake buƙatar kebul na RF.
Kuna iya zaɓar:
| Nau'in | Tasirin Halaye (Ohm) | Mai Gudanar da Ciki (mm) | Insulation (mm) | Mai Gudanarwa na waje (mm) | Sheath na waje (mm) | Attenuation a 900 MHz (dB/100m) | Attenuation a 1800 MHz (dB/100m) |
| 1/4" SF | 50 | 1.90 | 5.00 | 6.40 | 7.60 | 18.40 | 27.10 |
| 1/4" | 50 | 2.60 | 6.00 | 7.70 | 8.90 | 13.10 | 19.10 |
| 3/8" SF | 50 | 2.60 | 7.00 | 9.00 | 10.20 | 13.50 | 19.70 |
| 3/8" | 50 | 3.10 | 8.00 | 9.50 | 11.10 | 10.90 | 16.00 |
| 1/2" SF | 50 | 3.55 | 9.00 | 12.00 | 13.70 | 10.00 | 14.50 |
| 1/2" | 50 | 4.80 | 12.00 | 13.90 | 16.00 | 7.15 | 10.52 |
| 5/8" | 50 | 7.00 | 17.00 | 19.70 | 22.00 | 5.07 | 7.54 |
| 7/8" F | 50 | 9.40 | 22.00 | 24.90 | 27.50 | 4.05 | 6.03 |
| 7/8" SF | 50 | 9.40 | 22.00 | 24.90 | 27.50 | 4.30 | 6.30 |
| 7/8" | 50 | 9.00 | 22.00 | 24.90 | 27.50 | 3.87 | 5.84 |
| 7/8 "Rashin Asara | 50 | 9.45 | 23.00 | 25.40 | 28.00 | 3.68 | 5.45 |
| 1-1/4" | 50 | 13.10 | 32.00 | 35.80 | 39.00 | 2.82 | 4.27 |
| 1-5/8" | 50 | 17.30 | 42.00 | 46.50 | 50.00 | 2.41 | 3.70 |
Maganar tattarawa
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
