2 mita Jumper USB 1/2 ″ super flex with 7/16 Male DIN Connector
1 RF mai haɗin haɗin coaxial:
1.1 Abu da Plating
Inner shugaba: tagulla, plated da azurfa, Plating kauri: ≥0.003mm
Dielectric Insulation: PTFE
Outer madugu: tagulla, plated da ternary gami, Plating kauri≥0.002mm
1.2 Wutar Lantarki & Injiniya
Halayen impedance: 50Ω
Mitar mita: DC-3GHz
Ƙarfin wutar lantarki: ≥2500V
Juriya na lamba: madugu na ciki≤1.0mΩ, madugun waje≤0.4mΩ
Juriyar Insulator: ≥5000MΩ (500V DC)
VSWR: ≤1.15 (DC-3GHz)
PIM: ≤-155dBc@2x43dBm
Dorewar mai haɗawa: ≥500 hawan keke
2 RF coaxial na USB: 1/2 "Super m RF Cable
2.1 Abu
Inner shugaba: aluminum waya rufe da jan karfe (φ3.60mm)
Insulation dielectric: polyethylene kumfa (φ8.90mm)
Shugaban waje: corrugated jan karfe tube (φ12.20mm)
Jaket na USB: PE (φ13.60mm)
2.2 Fasali
Halayen impedance: 50Ω
Standard capacitor: 80pF/m
Yawan watsawa: 83%
Min.radius lankwasawa guda: 50mm
Ƙarfin ƙarfi: 700N
Juriya mai rufi: ≥5000MΩ
Garkuwa attenuation: ≥120dB
VSWR: ≤1.15 (0.01-3GHz)
3 Kebul na tsalle
3.1 Girman Bangaren Kebul:
Jimlar tsawon majalissar igiyoyi:
1000mm ± 10
2000mm ± 20
3000mm ± 25
5000mm ± 40
3.2 Siffar Wutar Lantarki
Mitar Mitar: 800-2700MHz
Halayen Halaye: 50Ω±2
Wutar lantarki mai aiki: 1500V
VSWR: ≤1.11 (0.8-2.2GHz), ≤1.18 (2.2-2.7GHz)
Insulation ƙarfin lantarki: ≥2500V
Juriya na Insulation: ≥5000MΩ (500V DC)
PIM3: ≤-150dBc@2x20W
Asarar Shiga:
| Yawanci | 1m | 2m | 3m | 5m |
| 890-960MHz | ≤0.15dB | ≤0.26dB | ≤0.36dB | ≤0.54dB |
| 1710-1880MHz | ≤0.20dB | ≤0.36dB | ≤0.52dB | ≤0.80dB |
| 1920-2200MHz | ≤0.26dB | ≤0.42dB | ≤0.58dB | ≤0.92dB |
| 2500-2690MHz | ≤0.30dB | ≤0.50dB | ≤0.70dB | ≤1.02dB |
| 5800-5900MHz | ≤0.32dB | ≤0.64dB | ≤0.96dB | ≤1.6dB |
Hanyar Gwajin Shock Mechanical: MIL-STD-202, Hanya 213, Yanayin Gwaji I
Hanyar Gwajin Juriya da Danshi: MIL-STD-202F, Hanya 106F
Hanyar Gwajin Shock Thermal: MIL-STD-202F, Hanyar 107G, Yanayin Gwajin A-1
3.3.Siffar muhalli
Mai hana ruwa: IP68
Yanayin zafin aiki: -40°C zuwa +85°C
Ma'ajiyar zafin jiki: -70°C zuwa +85°C
Maganar tattarawa
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
