Kebul mai lankwasa 1/2″, DIN 7/16 na namiji zuwa DIN 7/16 na maza kusurwar dama
| Nau'in suna | Kebul ɗin jumper mai tsawon inci 1/2 ya kai kusurwar dama zuwa dama | |
| Impedance | 50Ω | |
| Girgizawa | 100m/S2 (10~500Hz) | |
| Mita Tsakanin Mita | DC-6GHz | |
| Asarar Shigarwa | ≤ 0.15dB/6GHz | |
| Jure wa Voltage | 4000V rms a matakin teku | |
| Aiki Voltage | 2700Vr.ms a matakin teku | |
| Matsakaicin ƙarfi | Matsakaicin 3Kw | |
| Juriyar Rufi | ≥ 10000 MΩ | |
| Ƙarfin riƙe jagorar tsakiya | ≥ 6N | |
| Dorewa | ≥ 500 (zagaye) | |
| Juriyar hulɗa | Cibiyar Sadarwa ≤ 0.4mΩ | |
| Lambobin Waje ≤ 1.5mΩ | ||
| Rabon Tsarin Wutar Lantarki | Madaidaiciya | ≤ 1.20/6GHz |
| Kusurwar dama | ≤ 1.35/6GHz | |
1. Haɗin RF coaxial
| 1.1 Kayan Haɗi da Rufewa | |
| Mai sarrafa wutar lantarki na ciki | Tagulla, an yi masa fenti da azurfa, kauri na plating ≥0.003mm |
| Jagoran waje | Tagulla, an yi masa fenti da ƙarfe mai ƙarfi, kauri na plating ≥0.002mm |
| Maƙallin: Tagulla | Rufewa |
| dielectric | PTFE |
| 1.2 Siffar Wutar Lantarki da Injini | |
| Halayen rashin daidaito: | 50Ω |
| Kewayen mita | DC-3GHz |
| VSWR | ≤1.15 (DC-3GHz) |
| Ƙarfin Dielectric | ≥2500V |
| Juriyar hulɗa | Mai sarrafa ciki≤1.0mΩ, Mai sarrafa waje≤0.4mΩ |
| Juriyar Insulator | ≥5000MΩ (500V DC) |
| VSWR | ≤1.15 (DC-3GHz) |
| PIM (IM3) | ≤-155dBc@2x43dBm |
| Karfin haɗin haɗi | ≥500 zagaye |
2. Kebul mai haɗin RF: Kebul mai sassauƙa RF mai inci 1/2
| 2.1 Kayan Aiki | |
| Mai sarrafa wutar lantarki na ciki | Wayar aluminum da aka rufe da jan ƙarfe (φ3.60mm) |
| Dielectric na rufin rufi | kumfa polyethylene (φ8.90mm) |
| Jagoran waje | bututun jan ƙarfe mai rufi (φ12.20mm) |
| Jaket ɗin kebul | PE (φ13.60mm) |
| 2.2 Siffa | |
| Halayen hanawa | 50Ω |
| Na'urar capacitor ta yau da kullun | 80pF/m |
| Yawan watsawa | Kashi 83% |
| Ma'aunin lanƙwasawa guda ɗaya mafi ƙaranci | 50mm |
| Ƙarfin tauri | 700N |
| Juriyar rufi | ≥5000MΩ |
| Ragewar kariya | ≥120dB |
| VSWR | ≤1.15 (0.01-3GHz) |
3. Kebul ɗin tsalle
| 3.1 Girman Kayan Kebul | |
| Jimlar tsawon haɗin kebul | 1000mm±10, 2000mm±20, 3000mm±25,5000mm±40 |
| 3.2 Siffar lantarki | |
| Mitar Mita | 800-2700MHz |
| Halayen Impedance | 50Ω±2 |
| Wutar Lantarki Mai Aiki | 1500V |
| VSWR | ≤1.11 (0.8-2.2GHz), ≤1.18 (2.2-2.7GHz) |
| Ƙarfin rufin | ≥2500V |
| Juriyar rufi | ≥5000MΩ (500V DC) |
| PIM (IM3) | ≤-155dBc@2x20W |
| 3.3 Siffar Muhalli | |
| Mai hana ruwa | IP68 |
| Matsakaicin zafin aiki | -40℃ zuwa +85℃ |
| Matsakaicin zafin jiki na ajiya | -70℃ zuwa +85℃ |
3.4 Asarar Shigarwa:
| Mita | 1m | 2m | 3m | 5m |
| 890-960MHz | ≤0.15dB | ≤0.26dB | ≤0.36dB | ≤0.54dB |
| 1710-1880MHz | ≤0.20dB | ≤0.36dB | ≤0.52dB | ≤0.80dB |
| 1920-2200MHz | ≤0.26dB | ≤0.42dB | ≤0.58dB | ≤0.92dB |
| 2500-2690MHz | ≤0.30dB | ≤0.50dB | ≤0.70dB | ≤1.02dB |
| 5800-5900MHz | ≤0.32dB | ≤0.64dB | ≤0.96dB | ≤1.6dB |
Nassoshi kan shiryawa
Umarnin Shigarwa na N ko 7/16 ko 4310 kebul mai sassauƙa 1/2"
Tsarin mahaɗi: (Hoto na 1)
A. goro na gaba
B. goro mai kauri
C. gasket
Girman yankewa kamar yadda aka nuna a zane (Hoto na 2), ya kamata a kula da shi yayin yankewa:
1. Ya kamata a yi wa ƙarshen saman na'urar gudanarwa ta ciki katanga.
2. Cire ƙazanta kamar sikelin jan ƙarfe da ƙura a saman ƙarshen kebul ɗin.
Haɗa ɓangaren rufewa: Murƙushe ɓangaren rufewa tare da jagorar waje na kebul kamar yadda aka nuna a zane (Hoto na 3).
Haɗa goro na baya (Hoto na 3).
Haɗa goro na gaba da na baya ta hanyar yin ƙulle-ƙulle kamar yadda aka nuna a zane (Figures(5)
1. Kafin a yi amfani da manne, a shafa man shafawa a kan zoben o.
2. A riƙe goro na baya da kebul ɗin ba tare da motsi ba, a ɗaure babban jikin harsashin a jikin harsashin baya. A ɗaure babban jikin harsashin baya ta amfani da makunnin biri. An gama haɗa shi.
