1/2″ super flex jumper, 4.3-10 MINI DIN namiji
| Nau'in suna | 4.3-10 mini din namiji connector | |
| Impedance | 50Ω | |
| Girgizawa | 100m/S2 (10~500Hz) | |
| Mita Tsakanin Mita | DC-7.5GHz | |
| Asarar Shigarwa | ≤ 0.15dB/6GHz | |
| Jure wa Voltage | 4000V rms a matakin teku | |
| Aiki Voltage | 2700Vr.ms a matakin teku | |
| Matsakaicin ƙarfi | Matsakaicin 3Kw | |
| Juriyar Rufi | ≥ 10000 MΩ | |
| Ƙarfin riƙe jagorar tsakiya | ≥ 6N | |
| Dorewa | ≥ 500 (zagaye) | |
| Juriyar hulɗa | Cibiyar Sadarwa ≤ 0.4mΩ | |
| Lambobin Waje ≤ 1.5mΩ | ||
| Rabon Tsarin Wutar Lantarki | Madaidaiciya | ≤ 1.20/6GHz |
| Kusurwar dama | ≤ 1.35/6GHz | |
Ayyukanmu
1) Sayar da masana'anta kai tsaye
2) Ikon samar da kayayyaki na dogon lokaci, mai ƙarfi da dorewa
3) Lokacin isarwa: Kwanaki 3-5 na aiki
4) Kunshin, alama ko wasu ƙira bisa ga buƙatunku
5) Tsarin tallata tallace-tallace mai ƙarfi
6) Farashin da aka riga aka yi da kuma farashin da ya dace
7) Kyakkyawan sabis
8) Amsa muku da wuri-wuri
Nassoshi kan shiryawa
Umarnin Shigarwa na N ko 7/16 ko 4310 kebul mai sassauƙa 1/2"
Tsarin mahaɗi: (Hoto na 1)
A. goro na gaba
B. goro mai kauri
C. gasket
Girman yankewa kamar yadda aka nuna a zane (Hoto na 2), ya kamata a kula da shi yayin yankewa:
1. Ya kamata a yi wa ƙarshen saman na'urar gudanarwa ta ciki katanga.
2. Cire ƙazanta kamar sikelin jan ƙarfe da ƙura a saman ƙarshen kebul ɗin.
Haɗa ɓangaren rufewa: Murƙushe ɓangaren rufewa tare da jagorar waje na kebul kamar yadda aka nuna a zane (Hoto na 3).
Haɗa goro na baya (Hoto na 3).
Haɗa goro na gaba da na baya ta hanyar yin ƙulle-ƙulle kamar yadda aka nuna a zane (Figures(5)
1. Kafin a yi amfani da manne, a shafa man shafawa a kan zoben o.
2. A riƙe goro na baya da kebul ɗin ba tare da motsi ba, a ɗaure babban jikin harsashin a jikin harsashin baya. A ɗaure babban jikin harsashin baya ta amfani da makunnin biri. An gama haɗa shi.
