1/2 ″ super m jumper na USB DIN 7/16 zuwa DIN 7/16 3M
Mai dacewa don haɗa igiyoyin ciyarwa tare da kayan aikin 8TS da eriya, wanda ba dole ba ne na ƙarin matakan hana ruwa, kamar gel ko tef, ya dace da daidaitaccen IP68 mai hana ruwa.
Matsakaicin tsayi: 0.5m, 1m, 1.5m, 2m, 3m, buƙatun abokin ciniki na musamman akan tsayin tsalle zai iya gamsuwa.
Halaye & Aikace-aikace
| Ƙimar Wutar Lantarki. | |
| Vswr | ≤ 1.15 (800MHz-3GHz) |
| Dielectric juriya irin ƙarfin lantarki | ≥2500V |
| Dielectric juriya | ≥5000MΩ(500V DC) |
| Pim3 | ≤ -155dBc@2 x 20W |
| Yanayin aiki | -55oC ~ +85oC |
| Saka asara | Ya dogara da ƙafar kebul |
| Ma'aunin kiyaye yanayi | IP68 |
| Tsawon igiya | Musamman |
| Jaket | Gyaran allura |
| Mai haɗawa ya dace | Nau'in N/DIN |
Tsarin tsari da sigogin aiki
| 1/2" RF Cable | RF Connector | |||
| Kayan abu | Mai gudanarwa na ciki | Aluminum mai rufin ƙarfe (Φ4.8mm) | Mai gudanarwa na ciki | Brass, tin phosphorus bronze, tinned, kauri ≥3μm |
| Dielectric abu | Polyethylene kumfa (Φ12.3mm) | Dielectric abu | PTFE | |
| Mai gudanarwa na waje | Bututun jan ƙarfe (Φ13.8mm) | Mai gudanarwa na waje | Brass, tri-alloy plated, kauri ≥2μm | |
| Jaket | PE/PVC (Φ15.7mm) | Kwaya | Brass, ni plated, kauri ≥3m | |
| Zoben rufewa | Silicone roba | |||
| Ƙimar Wutar Lantarki da Injiniya. | Halayen impedance | 50Ω | Halayen impedance | 50Ω |
| Vswr | ≤ 1.15(DC-3GHz) | Vswr | ≤ 1.15(DC-3GHz) | |
| Daidaitaccen iya aiki | 75.8 pF/m | Yawanci | DC-3GHz | |
| Gudu | 88% | Dielectric juriya irin ƙarfin lantarki | ≥4000V | |
| Attenuation | ≥120dB | Juriya lamba | Inner conductor ≤ 5.0mΩ Mai gudanarwa na waje≤ 2.5mΩ | |
| Juriya na rufi | ≥5000MΩ | Dielectric juriya | ≥5000MΩ, 500V DC | |
| Ƙarfin wutar lantarki | 1.6KV | Dorewa | ≥500 | |
| Ƙarfin Ƙarfi | 40KW | Pims | ≤ -155dBc@2x20W | |
Maganar tattarawa
Umarnin shigarwa na N ko 7/16 ko 4310 1/2 ″ super m na USB
Tsarin haɗin haɗi: (Fig1)
A. gaba goro
B. baya goro
C. gasket
Girman raguwa kamar yadda aka nuna ta zane (Fig2), ya kamata a biya hankali yayin tsiri:
1. Ƙarshen ƙarshen madubi na ciki ya kamata a chamfered.
2. Cire ƙazanta irin su ma'aunin jan karfe da burar a saman ƙarshen kebul ɗin.
Haɗa ɓangaren hatimi: Matsa ɓangaren hatimin ciki tare da madubin waje na kebul kamar yadda aka nuna ta zane (Fig3).
Haɗa goro na baya (Fig3).
Haɗa goro na gaba da baya ta hanyar dunƙulewa kamar yadda aka nuna ta zane (Figure (5)
1. Kafin yin dunƙule, shafa man shafawa mai mai a kan o-ring.
2. Rike goro na baya da kebul ɗin ba su motsi, Maƙala a jikin babban harsashi a jikin harsashi na baya.Cire babban harsashi na jikin harsashi na baya ta amfani da maƙarƙashiyar biri.An gama haɗuwa.
